Synthesis of pentabromopseudilin and other arylpyrrole derivatives via Heck arylations

Pentrabromopseudilin and other 2 and 3-arylpyrrole derivatives were synthesized through the Heck–Matsuda reaction involving endocyclic enecarbamates and N-protected 3-pyrrolines, respectively. The overall processes permitted an easy and efficient access to these structural motifs present in several bioactive compounds. Attempts to synthesize the compound isopentabromopseudilin led to a tribromo aryl maleimide. We hypothesize that this latter compound is the putative product arising from the unusual thermal instability of isopentabromopseudilin.     

Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications

Composites based on biocompatible thermoplastic elastomer styrene‐ethylene/butylene‐styrene (SEBS) as matrix and multi‐walled carbon nanotubes (MWCNT) as nanofillers show excellent mechanical and piezoresistive properties from low to large deformations. The MWCNT/SEBS composites have been prepared following a green solvent approach, to extend their range of applicability to biomedical applications. The obtained composites with 2, 4, and 5 wt % MWCNT content provide suitable piezoresistive response up to 80% deformation with a piezoresistive sensibility near 2.7, depending on the applied strain and MWCNT content. Composite sensors were also developed by spray and screen printing and integrated with an electronic data acquisition system with RF communication. The possibility to accurately control the composites properties and performance by varying MWCNT content, viscosity, and mechanical properties of the polymer matrix, shows the large potential of the system for the development of large deformation printable piezoresistive sensors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2092–2103     

Different salinities water characterization by DSC-cooling

Water is a fundamental element of life. Its multiple uses are indispensable for a wide spectrum of human activities. This study aims to characterize water from different salinities obtained in the Cariri region of Paraíba, Brazil. The samples were analyzed using the DSC-coupled to the Peltier system (DSC-Cooling) and physical–chemical water tests performed employing reactive kits, using the Spectroquant Merck^? specific for each test. The calorimetric curves showed crystallization phase transitions with different characteristics in peak format and crystallization temperatures between the samples of different salinities. The calorimetric data obtained in the process of crystallization of water is directly correlated to the physico-chemical parameters of conductivity and total dissolved solids, showing that the analytical technology DSC-cooling/heating is suitable for characterization of different salinities water.     

Gas‐phase interactions of organotin compounds with glycine

Gas‐phase interactions of organotins with glycine have been studied by combining mass spectrometry experiments and quantum calculations. Positive‐ion electrospray spectra show that the interaction of di‐ and tri‐organotins with glycine results in the formation of [(R)₂Sn(Gly)‐H]⁺and [(R)₃Sn(Gly)]⁺ ions, respectively. Di‐organotin complexes appear much more reactive than those involving tri‐organotins. (MS/MS) spectra of the [(R)₃Sn(Gly)]⁺ ions are indeed simple and only show elimination of intact glycine, generating the [(R)₃Sn]⁺ carbocation. On the other hand, MS/MS spectra of [(R)₂Sn(Gly)‐H]⁺complexes are characterized by numerous fragmentation processes. Six of them, associated with elimination of H₂O, CO, H₂O + CO and formation of [(R)₂SnOH]⁺ (?57 u),[(R)₂SnNH₂]⁺( ?58 u) and [(R)₂SnH]⁺ (?73 u), are systematically observed. Use of labeled glycines notably concludes that the hydrogen atoms eliminated in water and H₂O + CO are labile hydrogens. A similar conclusion can be made for hydrogens of [(R₂)SnOH]⁺and [(R₂)SnNH₂]⁺ions. Interestingly, formation [(R)₂SnH]⁺ ions is characterized by a migration of one the α hydrogen of glycine onto the metallic center. Finally, several dissociation routes are observed and are characteristic of a given organic substituent. Calculations indicated that the interaction between organotins and glycine is mostly electrostatic. For [(R)₂Sn(Gly)‐H]⁺complexes, a preferable bidentate interaction of the type η²‐O,NH2 is observed, similar to that encountered for other metal ions. [(R)₃Sn]⁺ ions strongly stabilize the zwitterionic form of glycine, which is practically degenerate with respect to neutral glycine. In addition, the interconversion between both forms is almost barrierless. Suitable mechanisms are proposed in order to account for the most relevant fragmentation processes. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation and characterization of octadecyl acrylate monoliths for capillary electrochromatography by photochemical,thermal, and chemical initiation†

Monolithic stationary phases based on octadecyl acrylate for CEC using different initiating systems (UV irradiation, thermal, and chemical initiation) in the presence of lauroyl peroxide as initiator were synthesized. For each initiation mode, the influence of the porogenic solvent composition on both the morphological and electrochromatographic properties of the resulting monoliths was investigated. Under optimal conditions, excellent efficiencies for the photochemically and chemically polymerized monoliths (minimum plate heights of 6.9–10.7 and 6.5–12.6 μm, respectively) were achieved. Thermally initiated columns gave lower efficiency values, permeabilities, and longer analysis times compared to these initiating systems. The produced monolithic stationary phases were evaluated in terms of reproducibility and gave RSD values below 9.2, 10.6, and 9.8% for UV, thermally, and chemically initiated columns, respectively.     

Novel combination of non-aqueous capillary electrophoresis and multivariate curve resolution-alternating least squares to determine phenolic acids in virgin olive oil

This paper presents the development of a non-aqueous capillary electrophoresis method coupled to UV detection combined with multivariate curve resolution-alternating least-squares (MCR-ALS) to carry out the resolution and quantitation of a mixture of six phenolic acids in virgin olive oil samples. p-Coumaric, caffeic, ferulic, 3,4-dihydroxyphenylacetic, vanillic and 4-hydroxyphenilacetic acids have been the analytes under study. All of them present different absorption spectra and overlapped time profiles with the olive oil matrix interferences and between them. The modeling strategy involves the building of a single MCR-ALS model composed of matrices augmented in the temporal mode, namely spectra remain invariant while time profiles may change from sample to sample. So MCR-ALS was used to cope with the coeluting interferences, on accounting the second order advantage inherent to this algorithm which, in addition, is able to handle data sets deviating from trilinearity, like the data herein analyzed. The method was firstly applied to resolve standard mixtures of the analytes randomly prepared in 1-propanol and, secondly, in real virgin olive oil samples, getting recovery values near to 100% in all cases. The importance and novelty of this methodology relies on the combination of non-aqueous capillary electrophoresis second-order data and MCR-ALS algorithm which allows performing the resolution of these compounds simplifying the previous sample pretreatment stages.     

Influence of pH and Matrix Components in the Chromatographic Response of Pesticides

The pH effect of potato, apple, and soil matrices on the chromatographic response of nine pesticides was evaluated. All chromatographic analyses were performed in duplicate on a gas chromatograph with electron capture detection. The matrix effect observed in the chromatographic response of the pesticides was evaluated by comparison. We compared the chromatographic response of each pesticide in pure solvent and in organic extract obtained for the matrices. The organic extracts were obtained by solid–liquid extraction with partition at low temperature. Depending on the matrix pH, a greater or lesser amount of co-extractives can be extracted into the organic phase, which affects the matrix effect. The pH of the samples before the extraction process was modified in order to check their influence on pesticide responses. Statistical analyses involving principal component analysis and marginal means revealed that, in the potato and apple matrices, the co-extractives exerted positive effects on the chromatographic response of the analytes. At lower pH, the extraction of co-extractives from potato and apple was favored, thus increasing the matrix effect for these samples.     

A Convenient Synthesis of Unsymmetrical N,N′-Disubstitutedα,ω-Diaminoalkanes

A general procedure is described for regiospecific construction of unsymmetrical N-alkyl (or aralkyl)-N′-aryl-α,ω-diaminoalkanes 3 (n=2,3,4) by reduction of N-(ω -arylaminoalkyl)amides 2 with borane. Compounds 2 are readily obtained by condensation of N-(ω-haloalkyl)amides 1 with aromatic amines.     

The Effect of Gluconate and EDTA on Thorium Solubility Under Simulated Cement Porewater Conditions

α-Hydroxy carboxylate ligands like gluconate or polyaminocarboxylate ligands such as ethylenediaminetetraacetate (EDTA) are frequently used in decontamination procedures at nuclear power plants. The presence of these organic substances among nuclear wastes could enhance the solubility of actinides by forming soluble complexes. Thermodynamic data on the stability of gluconate and EDTA with actinides are essential to predict their increase in mobility, especially in high pH systems characteristic of cement environments of a nuclear waste repository. In this work, the solubility of thorium oxyhydroxide in the presence of gluconate and EDTA has been studied. The results highlight the key role of these organics in increasing the solubility of thorium at pH_c = 12. The presence of calcium at concentrations below 10^?2 mol·dm^?3 (characteristic of cement porewaters corresponding to cement compositions at the second degradation stage) does not seem to affect significantly the thorium solubility under the studied conditions.